• Fallofturkey@lemmy.world
    link
    fedilink
    arrow-up
    113
    arrow-down
    1
    ·
    8 months ago

    Also VGA: Don’t forget to unscrew both sides of me at the same time if you ever want to free me again.

    • octopus_ink@lemmy.ml
      link
      fedilink
      English
      arrow-up
      114
      ·
      8 months ago

      Also VGA: Don’t forget to unscrew both sides of me at the same time if you ever want to free me again.

  • bleistift2@feddit.de
    link
    fedilink
    English
    arrow-up
    88
    arrow-down
    2
    ·
    8 months ago

    I have never, ever had an HDMI cord, or a VGA cord for that matter, disconnect unintentionally. I haven’t turned those screws in years.

    • marcos@lemmy.world
      link
      fedilink
      arrow-up
      40
      ·
      8 months ago

      I gave up on screwing VGA cables way before the turn of the century.

      I’ve had some disconnect unintentionally. What was never a big problem. But HDMI connectors are much tighter, and I don’t expect to ever see any disconnect. Ditto for DP.

      Anyway, the fact that if you pull a modern cable it will unplug is a feature, not a bug.

      • Trainguyrom@reddthat.com
        link
        fedilink
        English
        arrow-up
        12
        ·
        8 months ago

        Anyway, the fact that if you pull a modern cable it will unplug is a feature, not a bug.

        I mean, a locking connector is also a feature. Just for a different market

    • pleasejustdie@lemmy.world
      link
      fedilink
      English
      arrow-up
      20
      ·
      8 months ago

      I’ve had VGA come out by accident when its not screwed in, mostly when cable routing and I give it a little tug to try and get it up to the monitor. I think the main reason for the screws is that VGA isn’t intended to be hotswappable so by screwing it in you were ensuring it wouldn’t actually pop out while in use and preventing a potential cause damage to components. While HDMI is hotswappable and is designed with specific tolerances to make it fit well enough that it won’t fall out by accident when routing and if it did, it won’t cause damage to components anyway so its probably better to just let it pull out if it gets tugged on than to have it dragging the system or monitor around.

    • Ech@lemm.ee
      link
      fedilink
      English
      arrow-up
      9
      ·
      8 months ago

      Work anywhere that the screen is moved regularly (like several times a day) and it’ll happen.

    • herrvogel@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      8 months ago

      My old laptop’s vga port had no screw holes. After years of plugging cables in and out of that port it eventually became loose and unable to hold onto a cable well enough to provide decent contact. In short, vga cables very rarely fell off but they most certainly did became loose and lost signal quality.

    • Transporter Room 3@startrek.website
      link
      fedilink
      arrow-up
      2
      ·
      8 months ago

      The only time the screws came in handy was when a mild earthquake shook an old crt monitor off the table, and out the window whose lip clearly wasn’t high enough over the table. Definitely saved someone a broken neck as people were sitting under it. I didn’t set it up, I was just there using it.

      Another anecdote for evidence, I have never had an hdmi cable slip, and often have trouble with the ones I’ve been using for over a decade having to be pushed a little harder than is comfortable in order to fit in. Never warped or twisted, still shiny no oxidation. Just likes to be quite snug.

      Of course I don’t use very many hdmi cables day to day so it could very well be my cable.

  • CannedTuna@sh.itjust.works
    link
    fedilink
    arrow-up
    46
    ·
    8 months ago

    They do make HDMIs with locking screws, but no one really uses them as very few products have the screw holes for them.

  • sandalbucket@lemmy.world
    link
    fedilink
    arrow-up
    44
    ·
    8 months ago

    Me: “Computer, I’m licking two paperclips that I’ve stuck into the vga port. I’d like to taste the rainbow. Send video to the port, please?”

    Computer: “Sure thing boss!”

    Me: “Alright, now, can I put my presentation on this projector over hdmi?”

    Computer: “No fuck you, hdmi protocol negotiation failed, and I’m scrambling your audio outputs for the rest of the day too”

  • pedz@lemmy.ca
    link
    fedilink
    arrow-up
    29
    arrow-down
    1
    ·
    edit-2
    8 months ago

    Also, VGA cables have no damn HDCP integrated, so you can pass anything you want with them, contrary to HDMI and DP which both have “anti piracy” protection integrated directly into the cable, for your inconvenience.

    In order to make a device that plays HDCP-enabled content, the manufacturer must obtain a license for the patent from Intel subsidiary Digital Content Protection LLC, pay an annual fee, and submit to various conditions. For example, the device cannot be designed to copy; it must “frustrate attempts to defeat the content protection requirements”; it must not transmit high definition protected video to non-HDCP receivers; and DVD-Audio works can be played only at CD-audio quality by non-HDCP digital audio outputs (analog audio outputs have no quality limits).

    • ikidd@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      ·
      8 months ago

      Oh, that’s worked remarkably well. Piracy is a thing of the past, and we all live in peace and harmony, with happiness and justice for all, thanks to the undefeated copyright protections afforded by the heroes at DCP LLC.

      Hurrah.

      • voxel@sopuli.xyz
        link
        fedilink
        arrow-up
        5
        ·
        edit-2
        8 months ago

        this is actually a part of type c spec btw
        there’s also a single screw version

    • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
      link
      fedilink
      English
      arrow-up
      9
      arrow-down
      2
      ·
      edit-2
      8 months ago

      I specifically do not like USBC because it’s flimsy as fuck. Every device I’ve had that used USB-C so far has had the PCB inside the port break off after a few years because it wiggles around too much. MicroUSB would eventually get super loose and not really stay in, but it never fully broke anything off inside the damn port.

      • AdmiralShat@programming.dev
        link
        fedilink
        English
        arrow-up
        12
        ·
        8 months ago

        I was just saying the other day to one of my friends that I have never had a USB-C port fail on me in anyway.

        Two sides of a coin I guess.

      • Flying Squid@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        8 months ago

        I don’t like USB-C because different cables have different functions and there is no standard to let you know what is what, so you just have to hope you don’t get them confused. A color code or something would have worked.

      • Björn Tantau@swg-empire.de
        link
        fedilink
        arrow-up
        2
        ·
        8 months ago

        I had too many micro USB slots die on me. That also killed my beloved Nokia N900.

        We never should have ventured beyond mini USB.

        • mbfalzar@lemmy.dbzer0.com
          link
          fedilink
          arrow-up
          4
          ·
          8 months ago

          Basically everything I have is type C now because I only want one kind of cord to worry about, but mini USB will always have my heart

  • sramder@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    8 months ago

    The first 2 computer repair shops I worked at both had nut-setters that someone had ground down on so they could be used to tighten or replace the screw bosses on a female VGA connector.

    Kind of a pain in the dick honestly… but I can confirm that it was entirely possible to drag a full sized tower off a workbench by the VGA cable ;-)

  • lseif@sopuli.xyz
    link
    fedilink
    arrow-up
    11
    arrow-down
    2
    ·
    8 months ago

    4 year old phone with usb-c whole full of dust: i must be in a perfect vacuum with no direct sunlight

      • brick@lemm.ee
        link
        fedilink
        arrow-up
        7
        ·
        8 months ago

        No idea why you’re getting downvoted. HDMI 2.1 supports 10-bit 4k 144hz with no stream compression. So the answer, unequivocally, is that yes it can.

        DisplayPort 1.4 requires DSC (stream compression) to do the same. DisplayPort 2.0/2.1 supports higher bandwidth but it is not common on displays at this point in time.

        People have other understandable reasons for preferring DisplayPort over HDMI (Open vs. closed standards), but there is no disputing the fact that HDMI currently outclasses DisplayPort in terms of bandwidth and thus the limits of what kind of signals it can carry.

        • NeatNit@discuss.tchncs.de
          link
          fedilink
          English
          arrow-up
          1
          ·
          8 months ago

          Yeah, that sounds about right. Every time I look up HDMI vs DP it seems they are basically exactly the same. One of them is always sightly ahead in some niche regard - they keep leapfrogging each other, so maybe now HDMI is in the lead but soon enough DP will overtake it - but in 99.9% of real world use cases they are basically the same thing. They’re both plug-and-play, easy to use and will get you the best picture quality your hardware can show you. It doesn’t matter what you use. (But use DP if you can because it’s nicer)

          Heck, you can send DP signals over HDMI cables and vice versa. It’s all a sham!

    • phx@lemmy.ca
      link
      fedilink
      arrow-up
      3
      ·
      8 months ago

      Yup. My DP cables at the back of my monitor are great, but the HDMI or USB-C flicker of I so much as touch a different cable that nudges them

  • frostwhitewolf@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    8 months ago

    *Don’t look at me or I’ll disconnect break

    I work in pro AV and I freaking hate HDMI. Causes so many problems and to some extent there’s really no avoiding it either unless your running really high end gear.

  • sgibson5150@slrpnk.net
    link
    fedilink
    arrow-up
    6
    ·
    8 months ago

    I really don’t miss DB15. Too many times when disconnecting, one of the standoffs would come unscrewed. Then you have to shut down, take the side off of your case, find the stupid nut, then screw the standoffs back in. Only finger tight, though, so it would all happen again the next time. 😆