Almost forgot before going to bed but I feel bi-weekly is a good rhythm for this.
Let us know what you set up lately, what kind of problems you currently think about or are running into, what new device you added to your homelab or what interesting service or article you found.
You must log in or register to comment.
Currently doing a full backup of 37TB to tape. Which I would normally do once per quarter but I got a smart error on one of my drive that I’ll have to replace but before shutting down and removing the drive I want to have a full backup I might even get warranty on the drive at least I got the last time this happened drive has lower then 200 days of runtime. We’ll see
What hardware are you using to read/write tape, and what does that cost you?
I’ve got around 30tb that I need to shift off of a Drobo at some point so I can repurpose the drives into a proper RAID setup that isn’t a closed source black-box from a dead company (that was a poor choice, 6 years ago 🙁). Keeping an eye out for solutions for when I get around to fixing that mess.
That’s why I initially got them to reorganize my raid setup and have them as backups in case I need them. So I’m using lto4 which is 800gb per tape (current standard is lto9 16TB per tape) And it really depends on how cheap you can get the drive for me I got a tape drive for like 200€ and bought bunch of tapes ~50 for 6€ per tape if you can get a LTO5 drive for a similar price you would only need half the amount of tapes. So all in for me it was 500€ but you can definitely buy less tapes if you don’t need that many all at once. For your 30tb that would be 228€ in tapes.
It was great fun researching the topic and comparing different eBay listings for hours 😅
Interesting; I’ll definitely have to keep that in mind. Much cheaper than getting basically a whole new set of hdds at almost $30/tb (new nas-grade drives, not referbs).
Thanks!
I plan on setting up the *arr suite and getting rid of Netflix, Crunchyroll, Amazon Prime and Disney+
I’m currently looking to connect an NVMe SSD to a Pi 4 I have in a differences location to finally have proper 3-2-1 backups. I’m trying to find a NVMe to USB adapter that will work though.
I just got cactus comments working on my writefreely blog. Cactus comments needs matrix, so I got matrix with element set up. It was an incredibly frustrating journey of learning, but it turns out the final bit wasn’t too complicated. I’m running on TruNas, which I hear you shouldn’t do, but it’s too late haha.
I also got the whatsapp bridge set up, but it doesn’t look like matrix supports disappearing messages, so I left some rooms it created b/c one of the larger groups easily took up a gig of storage before disappearing messages was turned on.
Anyway, writefreely has federated cactus comments that you can currently only sign in with a matrix account lol. I can try and change that later. I host the photos with picsur.
I think that I need to collect my notes and memories and put it into a blog post, but I don’t really want to turn my blog (if I even keep up with it) into a blog about how to self host a blog.
In hindsight, I don’t think the comments were worth it, but whatever.
ITT: lots of busted pihole v6 updates
Finally got started with Grafana, Prometheus and Meshtastic.
I wonder why so many people had issues with the v6 pihole update.
I pulled the new docker container and it ran overtop the previous version just fine. The only issue I had was I had the admin password set to empty via an env variable and that variable name changed. Took like 10 min to find and fix. The rest migrated perfectly.
Now I’m just waiting on orbital-sync to add v6 support, but that’s just around the corner and not that critical.
I had a pair of v5 with unbound setup, and ran the pihole -up and it went down lol. Dunno what happened, but i reinstalled and it’s all good.
I only run the basic block list, so I am thinking more and more to setup docker on my main server and move my pihole, pyvpn and grafana there and free up my raspi.
I’ve had two failed harddrives in the last month. Not sure if bad batch or what. Thankfully the order these were on only were the two drives so may not see more. They are under warranty but it’s still a pain!
Otherwise I’m enjoying Mealie lately for my recipes. Kinda nice having them all in one place but accessible by anyone in the house.
I found Mealie to be a bit bloated and not fitting my needs too well. I moved to KitchenOwl. Small project but I love it.
I love mealie as well. My wife and I keep all our recipes in mealie.
I feel bi-weekly is a good rhythm for this.
What does biweekly mean to you? Twice a week, or once every two weeks? If it’s the latter, I prefer to use fortnightly, since it’s not ambiguous.
Yeah, nobody other than Brits use fortnightly anymore.
I mean every other week. I wasn’t aware of the other interpretation, but I think in combination with “The Sunday thread” it’s unambiguous?
I have never heard fortnightly, but then I’m not a native speaker. Is that commonly used?
I have always heard bi-weekly be every other week, and semi-weekly be twice a week
I think in combination with “The Sunday thread” it’s unambiguous?
Perhaps, though I guess it could also be that there is “The Sunday thread” and “The Wednesday thread”.
As for whether fortnightly is common or not, I think it is, but the other commenter suggests that only the Brits use the term. Fairly certain I’ve heard that from an Aussie friend though, could be that US Americans don’t use the term.
Perhaps semimonthly is the most unambiguous term? That’s what Mariam-Webster seems to suggest.
Semi monthly sounds like “monthly, or not” to me. Not sure about the alternatives I’ve seen so far
True, didn’t think it that way. I don’t know what would be best, English is such a wierd language.
Trying to get my hands dirty with LLM, Ollama and Web Scrapping.
I don’t understand most of it , but hey, that’s the fun. No complaints.
Immich. Wanted to exclusively use the external libraries features in read only.
Set it up once in its own Proxmox LXC under Docker. Set it up all properly started scanning my entire library. And when I woke up again it had crashed and I couldn’t recover it.
Started over the following morning and only gave it access to 2024 instead of everything. And it filled up to 30gb/40gb I gave it with thumbnails and files and such. Guess it crashed the other day because it took up too much room.
Guess I’ll start over again, and ensure all the config files and thumbnails are stored on my NAS so they can take up the space they need to without overloading the main (small SSD) on my server.
Pihole 6 broke my DNS (dnsmasq), and since I had a fw rule in opnsense to only use pihole’s DNS, and deny public DNS access, it was an early rise for me :)
Unbound broke on both of mine day one of v6 and I’ve still not gone and fixed it. Sigh.
And that’s why you have either a backup for your DNS or know whats auto-updated ;)
As you mention opnsense:
What do you mean with fw rules to only use pihole dns?
This sounds partly like a DHCP config and partly like a deny (hardcoded) DNS requests and to please use what DHCP supplied (looking at you google/amazon)I did have backups, it was an easy fix. I had a
pihole -upon a crontab for years, probably not the best idea :)FW rule accept :53 from pihole only, deny :53 from all. I had some devices with hardcored DNS settings (8.8.8.8).
Damn… DNS issue early in the morning… What a nightmare 😂! Hope you got enough caffeine.
Had a hard drive fail my main zfs array. First time I have experienced a disk failure so it was a bit worrying. Thankfully I had added an additional drive to expand the array so I was able to quickly rebuild to that drive. Currently shopping for a replacement. From now on I think I will keep a cold spare just in case this happens again. I just wish hard drives would stop increasing in price.
You save some money by buying recertified drives from Serverpartdeals.
Yea that is what I have been doing. Although it seems the smaller sizes are not a great deal anymore and I am hesitant to buy anything larger due to the long rebuild times
Realised my jellyfin lxc had a maxed out bootdisk yesterday, haven’t been using it for a while. Luckily I have decent backups setup so I was able to restore a backup from late January when it wasn’t filled yet. A quick library rescan and everything was up and running again.
Finally got my lemmy instance fully updated.
Been improving my backup scripts in advance of adding backup to a server.
Updated servers and other services.
I upgraded immich without breaking everything. That’s always reason to celebrate.
I’m running the Immich
FlatpakSnap specifically for this reason. It’s always one version out of date but always self updates without issues :)flatpak
You mean as a client or a server?
I misremembered; I run “Immich Distribution” which is a snap and I run it on a Debian server.
How exactly does stuff get broken? Never rly had a problem bumping up the version in docker. The only issue has been the playstore version taking longer to push updates sometimes for the mobile apps.
A few versions ago I upgraded it and some default port configs changed rendering it unusable. Since my upgrades are a docker command, I had to go hunt down the error message. It didn’t take long, but it def broke the setup.
I feel you 😂
After having upgraded my Pi-Hole to v6, for some reason yesterday it started to not recognize any of the blocklists. So, I resetted it and now it works.
