I have heard that once you start vaping a bowl in a vape, you have to finish it in one siting or rest of the bowl will be wasted/taste horrible. Is this true?

So the answer is “kinda”.

As mentioned, different temperatures extract different active compounds from the herb. It also cooks different flavor terpenes which affect how the vapor tastes.

When you load and electronic vaporizer, run a partial session, turn it off and then restart at the same temperature, you will find vapor production seriously diminished, and vapor taste changes to more of a “burnt popcorn” flavor.

You have several options in this regard:

• Temperature-step. Some people enjoy a low temp session in the mornings, and then cooking the same load in the evenings for sedation. This works because you’re cooking a new set of compounds. The vapor flavor and production still changes, but it’s not quite as bad.

• Microdose. There are different methods of microdosing with every vaporizer but basically you are cooking only as much as you need for that session and then reloading each time you use the device. This is great if you’re a flavor chasing snob like myself lol.

Now there are always exceptions to the rule - butane powered vaporizers don’t exactly play by the same set of rules. If you load up a Dynavap Vapcap take a puff and then let it cool down, you won’t notice a huge change in performance later when you re-heat the device. But that’s also because it’s not a flavor-chasing vaporizer, and instead it roasts the herb during the heatup phase which slightly alters the taste anyway - and the heat penetrates to the core of the load much quicker with a butane torch

Personally I stick to the plain old devil’s lettuce. Vaporizing pipe tobacco can be enjoyable if it’s flavored, but yeah I don’t bother trying many other herbs lol.

The fun part is the leftovers - unlike smoking you can re-use your leftovers from the dry vaporizer (I call it ABV - Already Been Vaped, others call it AVB - already vaped bud). It’s already cooked so you can eat it straight (some people add it to yogurt, others mix it into smoothies or chocolate milk, some make “firecrackers” with crackers and peanutbutter/jelly for example) - the results tend to be more sedative than usual.

I personally have used a sous-vide to make budder using cooked herb which set up in silicone molds. I then make rice krispy treats using the budder.

Lol, I often ask Chat to describe things to me like a stoned surfer bro, it’s hilarious

Oooo you’d be the perfect candidate to try dry herbal vaporizing. 95% of the time those negative complaints you see are from hard core daily smokers who expect the exact same results… unaware of the fact that dry vaporizing does not yield the exact same results because it is a cleaner way to extract the actual active compounds.

The problem is most stoners confuse the affects of the herb itself… with that of combustion and inhaling carbon monoxide and carcinogenics. For people in that situation, I actually advise a one or two week “t-break” to let the body fully detox so they can fully enjoy the dry herbal vaporizing.

Prefilled concentrate “vapes” are a completely different ballgame. I equate those to eating junk food - because they taste great and produce awesome clouds… but they are never “full spectrum” - the extraction process to produce the concentrate doesn’t extract “everything”, and temperatures used in some extraction processes can actually cook off some of the lower temperature affects. This is why I personally prefer dry vaporizing. I made the switch 11 years ago and haven’t looked back - the only time I combust is socially with friends when they’re passing around something smokeable - but even then it’s a rare occasion (I just hate the taste/smell/effects when combusting).

Not all dry vaporizers are crated equal. Back about ten years ago, there were many cheap no-name vaporizers which were terrible some vaporized extremely slowly (a session could take 20+ minutes for a full complete extraction) - there were even some like the “Atmos Raw” which was claimed to be a dry herbal vaporizer - in reality it was an ecig vaporizer and it had an attachment which would physically burn the herb until it combusted - it was not an actual “Vaporizer”. But I know many people who paid $50+ for the Atmos Raw because it was the cheapest “vaporizer” they could find (and there were groupon deals and such offering them for $25, it was sad)

If you’re “vaporizer curious” I would start with something like the Xmax V3 Pro or PlanetOfTheVapes One vaporizer - both are great entry level devices which perform well for the price (they are not the best in the industry, but certainly good beginner vaporizers).

Alternatively, there is another brand of Vaporizers made in America called the “Dynavap Vapcap” - which is pretty much unlike any other dry vaporizer on the market - it mimics more of a single-hitter from the combustion side of cannabis in the way it looks. It’s not a “traditional” vaporizer in any sense of the word - but there is a reason why it has developed a cult-like following since it’s release eight or nine years ago.

I know lots of others answered but I’ll try to sum up some notes for you:

• Combustion releases a ton of extra stuff including a toxic cocktail of carcinogenics and carbon monoxide which are bad for your body. Some of these chemicals release the instant euphoric feeling followed by sedation. People who try dry vaporizing are expecting the same exact effects, when the reality is that it is cleaner and different.

• Different temperatures extract different active compounds from the herb. In general terms a Sativa vapes great at lower temps (300-385F) while Indica and CBD strains work better at higher temps to extract that sedation and pan relief you get from the herb. This means you can essentially “customize” your high to what you want/need at that time. If you have a hybrid for example you could cook out the low temperature sativa side in the morning, then cook the same herb at night to extract the indica side of the herb.

• Not all dry vaporizers cook at the same rate. They are essentially miniature ovens. Many people buy cheaper weaker underpowered devices preheat them and suck away like they’re hitting a waterpipe - this drains all heat out of the oven faster than the shitty heater can recover temps. The secret here is to either get a higher powered device, OR learn how to slow your roll and take a gentle sip (filling your lungs over 20 seconds instead of filling them in 3 seconds). This is partially why you hear people say vaporizers suck - because they are not obtaining a full extraction before they think it’s finished (since they’re getting no more vapor it must be fully cooked!).

• Unlike smoking where you can “Green out” from smoking too much (due to excessive carbon monoxide poisoning which causes you to start vomiting if you smoke too much too frequently), dry vaporizing does not do this. You can essentially get MORE medicated than possible with combustion because you’re not inhaling all that nasty toxic shit.

Dry vaporizers come in many shapes and sizes. Some cook faster, some produce tastier vapor for flavor-chasing snobs like myself, some produce bigger clouds, others better for social gatherings, or more stealthy, faster extraction, etc. Most of us true ents have multiple devices in our collection depending on our needs at the time.

LPT - you can pair almost any vaporizer with a waterpipe for some epic vaporbonging action. Price does not equate to performance, there are many other vaporizers besides “ball vapes” that can totally get you where you need to be. Hell on vacation when my preferred portable failed (bad battery), I bought a shitty no-name $85 vaporizer at a smoke shop and was able to make it work for my needs until I got back home lol.

If you let me know more about your budget and what you want to do I can probably set you on a better path than a ball vape - I’m personally not a fan of them for novice users for several reasons.

Sniff the comments in this thread make me so happy. I gave up combustion over a decade ago and my body has been happier for it.

These days I only combust socially when joining old friends who don’t dry vape.

Lol, this industry has done plenty for me over the past decade, dropping some knowledge is the least I can do to give back.

Haha yeah the MFLB is for sure a very analog experience and takes quite a bit of practice to perfect. There are some devices in my collection I just don’t share with anyone who doesn’t also own the same device simply because I don’t want them to accidentally combust and tarnish the flavor of the device.

The MFLB Finishing grinder is a niche product but it has it’s uses. I like that it locks into the notch on the MFLB when grinding so it dumps directly into the oven for you. But dang it’s a PITA to grind away like that - the dryer the herb, the easier to grind with that finishing grinder. Still it is a VERY popular grinder for many conduction-style vaporizers. I actually sell aftermarket adapters to connect the MFLB to a pax (custom funnel design), or even a mason jar lid so people could fill a glass jar with ultra finely ground herb haha.

Note - there are other grinders like the Brilliantcut grinder (pricey, but damn it’s a nice grinder, I have one) which have different middle plates so you can choose the grind type (fine, medium, or coarse) - just grab two middle plates and you can swap out as needed.

Or if you don’t want to buy any new grinders right now and have a 3 or 4 piece grinder try this trick: Turn your grinder upside down and grind extensively before uprighting your grinder for the herb to fall through into the bottom compartment.

The MFLB actually uses radiant heating as the primary source of cooking, as opposed conduction or convection which is far more common in portable vaporizers. This is partially why it’s such a popular device with a cult following more than a decade after it’s release.

Generally I’m not too concerned about stealth, affordability is somewhat a factor and (maybe like most people) I like to look for something that doesn’t break the bank and gives a lot for what you pay. Portability is favorable as I can see us using it more as we frequent more places where recreational use is legal.

For many years PlanetOfTheVapes (one of my largest retail distribution partners) sold their own POTV One vaporizer (basically a customized build of a HealthyRips Fury Edge vaporizer) for $99. It was an insanely popular budget-friendly device for the company. Basically one of their top five devices still to this day. POTV just dropped an upgraded model called the Lobo which I have yet to get my hands on. But knowing the company and knowing the previous device, I’d say that the Lobo is probably a really good option for the money - it’ll be MUCH easier to use.

While the MFLB may be fully analog pulsing heat to the oven, think of these temperature-regulated portables like a car on cruise control. Just set your desired temp and sip away - the heater will pulse itself as needed to maintain that temperature (within a few degrees).

You can also do some fun stuff with the Lobo since it uses dosing capsules - you can preload those and easily reload the device on the go. I also like dosing capsules for “microdosing” - toss a bit of herb in the bottom of the oven then use an EMPTY dosing capsule as a spacer to hold things in place.

Ah the Magic Flight Launchbox (aka MFLB) was a cult classic back a decade ago. It was one of the best and stealthiest devices on the market… once you get the hang of using it. The problem is that it is not the easiest vaporizer to handle - much more of an “analog” device.

Don’t throw it out, but certainly stash it away until you become a more “experienced” vaporent.

Temperature control can be handy… depending on what you personally seek from the flower. Different temperatures don’t simply mean “bigger clouds” - the reality is that different temps release different active compounds from the flower. This means you can “customize” your sesh based on your desires. For example I like lower temps in the mornings for a more uplifting creative affect, and higher temps in the evening for sedation. Others need high temp at all times for pain relief and sedation. That’s fine, not all of us seek the same thing from the plant, and part of the fun is discovering what temps work best for you personally.

First, price does not equate to performance. That MFLB can out perform a bunch of vaporizers that retail for over $200… once you know how to handle it properly (which takes a lot of practice… and patience loading the device with ultra finely ground material - this device needs some of the finest ground herb of any device on the market).

Next, know that not all devices perform the same - vapor flavor, heatup times, oven sizes, draw restriction, etc all vary wildly from device to device. Since I work in the industry I’ve handled literally countless devices (lost count around four dozen lol) so by all means feel free to ask me how they’d compare to the MFLB.

What specifically are you looking for in a device? It sounds like temp control is one desire, I bet you wish you could get bigger clouds, but what else is a desire in a new device?

Do you need stealth? Portability? Budget-friendly? etc

Let me know what are most important aspects and I’ll try to give you a few good options to meet your needs.

Woot! Happy to hear it! Thank you for your patronage - this biz is purely a labor of love with no corporate overlords. I am constantly innovating and pushing out new widgets to keep things exciting on the website.

I didn’t realize different temps have different effects as well. Do you have a chart or description of what effects the different temps have? Thanks!

There are a few charts floating around, but I don’t exactly agree with all their data - some of the temps listed on these charts comes from single studies with minimal testing.

In very general terms I say low temps below 375F for a more cerebral creative uplifting affect, while temps over 400F work better for sedation and pain relief (higher temps especially for pain relief). Some people like to enjoy a low-temp sesh in the morning, and cook the remainder of the bowl in the evenings at a higher temp. The fun part is the ability to take a hybrid or indica and extract only the sativa-effects from the plant (which is inefficient as you won’t get many big clouds, but it can be done which is handy when the options are slim).

The fun part is self discovery - start at 300F and work your way up 15F at a time, see how you feel

Neither, I prefer dry vaporizing to combusting these days - it’s healthier, tastes better, and I can customize what the affects feel like (different temps cook out different medical benefits from the plant)

But I still enjoy combusting socially when someone is passing something around, but I absolutely prefer flavor chasing with a dry vape

Heck yeah! I’ve been spoiled by dry vaping to the point where I can’t even handle the taste of smoking anymore. I always get pissed when I accidentally combust with my Vapcap or other butane powered device.

I love my Crafty+ It provides exceptionally smooth rips without any mods (between the Crafty and Mighty, I actually chose the Crafty because it’s more pocket-friendly and has a smaller cooling unit allowing me to still enjoy some of the heat from the vapor). However I am usually a flavor chasing snob, especially when trying out a new strain so my crafty rarely gets used these days. However thanks to my position in the industry, I have many devices to choose from so I’m always cycling through device.

Careful with that tooth extraction! Be sure to let things heal fully before using any vaporizers, or you could risk a “dry socket” which is something extremely unpleasant from what I understand. For now, edibles only! haha.

Haha I’m more so talking about heavy smokers who are looking for something - it can take 5 minutes for the affects to really be noticeable to them.

Varies entirely from person to person. Many people have a hard time making the switch to dry flower vaporizing because their bodies are accustomed to the toxic cocktail of carcinogenics and carbon monoxide yielding an instant euphoric headrush and couch-lock.

Dry vaporizing takes time to hit you (5-10 minutes) so that can be hard for many people who expect a more instantaneous affect.

Additionally unlike smoking where you get everything at once, with dry vaporizing we use different temperatures to release different medical benefits from the flower.

I work in the industry over the past decade and have handled countless dry flower vaporizers (literally lost count around four dozen). While I enjoy the Volcano, I don’t find it the most efficient vaporizer on the market.

For a novice beginner on a budget, I often suggest the Dynavap Vapcap - it can be tricky to use (so watch videos first!!) but it packs a hell of a good punch for the money, and it’s a great transition for people who smoke regularly.

The reason for this is because combustion releases a toxic cocktail of carcinogenics and carbon monoxide. Many people tend to associate those affects with those from the herb itself.

The reality is that desktop vaporizers can cook very efficiently when they are preheated and loaded properly.

The problem is that one will never fully appreciate the affects from dry vaporizing unless they fully detox from combustion by not smoking (vaporizing exclusively) for a few weeks to month. I made the switch to dry flower vaporizing a decade ago and I still smoke socially with friends, but I hate it - the smell, the taste, the feeling, etc.

Dabs are concentrated and extract faster than most dry flower vaporizers which is why they can often work, however they can also kill one’s tolerances when used in excess. I prefer dry flower vapes to avoid killing my tolerances (I also switch up my daily driver two or three times a year to avoid building up a tolerance to the same device over time).

Nah, the Santa Cruz Shredder is a pretty nice grinder and should work great with the TM2. If you think you’re missing out on anything, try doing two things:

1. Clean your grinder! Grab a toothbrush and use a bit of ISO alcohol. Remove the PTFE ring using a knife first before using ISO to clean (it will affect the plastic). The toothbrush and iso will help you scrub away the buildup on the teeth of the grinder.

2. If you have a 3-piece or 4-piece grinder, try turning the grinder upside down to get a more thorough grind before uprighting the grinder and letting the herb fall through the holes into the bottom section.

Oh totally, an average grinder will work just fine for most vaporizers, especially with enough patience. But I am absolutely talking about the refined ent who is looking for ways to “maximize” the efficiency of the device, or for those like myself who are flavor chasing snobs - different grinds can help achieve a more efficient and tastier extraction.

Depends entirely on how you’re consuming your herb. As mentioned to another poster, there are different grades (hardness) of steel. Cheap grinders don’t hold a sharp edge on the teeth for very long. Your grinder still “works” but is it as easy to turn? Does it gunk up with resin fast? That’s due to tearing/mushing the herb as opposed to grinding.

Additionally not everyone simply smokes their herb. Dry herbal vaporizers are essentially mini ovens designed to cook the herb to release the active compounds (without combusting and inhaling a nasty toxic cocktail of carcinogenics and carbon monoxide) - the fun part is different temps release different effects from the herb (so I can skip the sedative/couch-locking affects of the herb when desired). Not all dry vaporizers “cook” the same way - some devices work best with an ultra-fine grind (almost powdered kief) for optimal heat-transfer, while other vaporizers benefit from a very fluffy “airy” grind.

So if you’re loading up a waterpipe or joint, sure a medium grind is good enough. But if you’re trying to get fancy, there are certainly plenty of ways to enhance your sesh experience.

Yep, I have one - the teeth hold a strong point, and the strong magnetic core is handy to hold dosing capsules while loading individual ones for my Rogue/Edge capsules.

Mine has held up a LONG time and still looks great despite wear/tear. My Santa Cruz Shredder didn’t hold up half as well

Howdy! My older bro around the same age is also in the same boat - they are still at the early stages of giving up the bottle. I really want to introduce them to this miracle plant - but I’m still holding off a bit longer before anything haha.

Smoking sucks anyway - it stinks, and it’s terrible for your body. Dry vaporizing and edibles is the way to go. Fun part about dry vapes is that you can use different temps to choose what sort of affects you get from the plant.

Hot damn I forgot about the movie - I still haven’t watched it yet! (Life keeps me too busy to watch much television these days lol)