My MSI MAG Z790 motherboard supports rear channel speakers.

If I were to mount a pair of speakers behind me, that would require approximately 15 feet (4.5 meters) of speaker wire from my PC to the speakers. Do I have to worry about the AUX port’s power output if I were to use 18 or 16 gauge speaker wire?

  • Telorand@reddthat.com
    link
    fedilink
    arrow-up
    3
    ·
    10 months ago

    8Ω is pretty low impedance. By comparison, the Sony MDR7506 is 63Ω, and they work just fine with the amp built into my mobo at only 10%.

    Are you sure?

    • glimse@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      10 months ago

      I’m pretty confident but not 100% sure, I’m on my phone and only skimmed the manual.

      Impedance isn’t the issue here, headphones are completely different - their tiny speakers need significantly less power to drive them. I don’t think the motherboard is capable of moving the cones in the speakers OP linked

      The giveaway here is the inputs - your headphones have an aux (or 1/4"?) input and these speakers have speaker wire inputs

      • Telorand@reddthat.com
        link
        fedilink
        arrow-up
        3
        ·
        10 months ago

        I mean, you can always solder a 1/8" stereo connector onto those wires, but the point about wattage isn’t something to be ignored, and I forgot that.

        Thanks!

        • glimse@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          10 months ago

          I did some wacky cable conversions when I worked in the field but it was usually just to extend line level

          Analog audio is fun lol